Add device
Identification number:
Code:
Invalid identification number or code.
Unknown error. Please try again later or contact support.
Connection test
Waiting for connection with the device..Test connection
ConnectedEnter device phone number
Error: Device appears to be already registered on different account.
Error: Limit of number of registered devices on this account has been reached
Unknown error. Please try again later or contact technical support.
If you are using your own SIM, make sure that:
APN
To enable your device to communicate with the Internet you need to configure APN. After inserting SIM card to the device send following SMS command:
APN name user password
Example configuration for:
APN internet plusgsm plusgsm
APN internet internet internet
APN internet
APN playmetric
APN configuration is provided by GSM operator.
Order SIM card for 84 zł netto
If you want to extend SIM card for another year please enter address for new invoice and shipping. We will contact you shortly:
Your phone number:
Contact information:
Place
Import numbers
Select file
Processing information
Change device name
You can set your device name to whatever you want, ex:
Upgrade your device
If you are interested in upgrading your device contact us:
Already registered maximum number of energy meters
Purchase additional subscription to increase the limit. Contact us:
Add modbus extension
GSM settings
Something gone wrong. Please try again later or contact support
Select what should happen when authorized number calls device.
You don't have any output sensors.
RFID place
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Name:
Name:
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Unit of measurement
Change sensor name
Name:
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Custom display:
Set custom text and icons for ON/OFF values.
IO extension
Name
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
EasyID
Enter ID of connected IO extension or leave blank to remove sensor:
Invalid code.
Configure ping sensor
Name
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Ping options
Set IP address or host name and data collection interval:
Invalid code.
Change phone number
Enter device phone number.
Phone number:
Configure external temperature sensor
Name
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
EasyID
Enter ID of connected temperature sensor or leave blank to remove sensor:
Invalid code.
Configure energy meter Configure virtual energy meter
CO2 factor
Name
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Meter options
Set meter model and data collection interval:
Invalid code.
Tariff options
Set tariff to enable electricity charges information:
Tags
Assign tags to sensor. You can add up to 8 tags.
Rename series
Rename tag
Configure analog input
Name and icon
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Unit of measurement
Fill the table below to display data in desired unit.
| Display unit | |
|---|---|
| 0 (zero) W/m² = | |
| Max = W/m² = | |
| Sensor value | 12:00 12/12/2112 W/m² |
Invalid code.
Configure pulse input
Name
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Unit of measurement
Fill the table below to display data in desired unit.
| Display unit | |
|---|---|
| Decimal points | |
| Icon |
|
| 1 W/m² = | pulses |
| Sensor value | 12:00 12/12/2112 W/m² |
Tariff options
Set tariff to enable charges information:
Run hours setup
You can set display alarm values. This will result in displaying visual indicator after exceeding given value.
Warning value:
hoursAlarm value:
hoursSub counter:
Last reset performed 05/06/2014.
Reset or adjust.
Configure virtual sensor
You can set sensor name to whatever you want. The name will be displayed in all modules of control panel and other applications.
Name:
Formula (help):
Display unit:
| min | low | high | alarm | max | |
|---|---|---|---|---|---|
Widget type:
Formula
Following functions are available:
Function Description
val(sensorId) - returns value of sensor (recommended)
raw(sensorId) - returns raw value of sensor
if(x,a,b) - if X then a else b
text(x,a,b) - if X then a else b
fixed(x,y) - display numeric value x as decimal with y digits after dot
Function Description
sin(x) Sine of x (x is in radians)
cos(x) Cosine of x (x is in radians)
tan(x) Tangent of x (x is… well, you know)
asin(x) Arc sine of x (in radians)
acos(x) Arc cosine of x (in radians)
atan(x) Arc tangent of x (in radians)
sqrt(x) Square root of x. Result is NaN (Not a Number) if x is negative.
log(x) Natural logarithm of x (not base-10).
abs(x) Absolute value (magnatude) of x
ceil(x) Ceiling of x — the smallest integer that’s >= x.
floor(x) Floor of x — the largest integer that’s <= x
round(x) X, rounded to the nearest integer.
exp(x) ex (exponential/antilogarithm function with base e)
Function Description
random(n) Get a random number in the range [0, n). If n is zero, or not provided, it defaults to 1.
fac(n) n! (factorial of n: “n * (n-1) * (n-2) * … * 2 * 1″)
min(a,b,…) Get the smallest (“minimum”) number in the list
max(a,b,…) Get the largest (“maximum”) number in the list
pyt(a, b) Pythagorean function, i.e. the c in “c2 = a2 + b2“
pow(x, y) xy. This is exactly the same as “x^y”.
atan2(y, x) arc tangent of x/y. i.e. the angle between (0, 0) and (x, y) in radians.
Formula library
First select sensor then you will be presented with selection of predefined formulas.
Sensor:
Formula: